Inland Empire Drive Line Product Results

Inland Empire Drive Line 210866-1XS Center Bearing Support with Polyurethane Cushion for Extreme Service

Center Bearing Support with Polyurethane Cushion for Extreme Service. Bearing ID is 1.574, Bolt Hole Spacing is 6.620. Recommended to Reduce Torque Induced Shudder on Startup and When Towing.

$179.55 USD

More Info

Inland Empire Drive Line 211431XS Center Bearing Support with Polyurethane Cushion for Extreme Service

Center Bearing Support with Polyurethane Cushion for Extreme Service. Bearing ID is 1.260, Bolt Spacing is 5.880. Recommended to Reduce Torque Induced Shudder on Startup and When Towing.

$179.55 USD

More Info

Inland Empire Drive Line 2-1153 Combo 1350X3R U-Joint with Grease Fitting

Grease Fitting U-Joint. 2.556 Across Cap is 1.125 C Clip Style by 3.625 Across Cap 1.188 Outside Snap Ring Style

$88.49 USD

More Info

Inland Empire Drive Line 211590-1XS Center Bearing Support with Polyurethane Cushion for Extreme Service

Center Bearing Support with Polyurethane Cushion for Extreme Service. Bearing ID is 1.181, Bolt Spacing is 5.880. Recommended to Reduce Torque Induced Shudder on Startup and When Towing.

$179.55 USD

More Info

Inland Empire Drive Line 2-2-939 Ford 8.8 1310 Series Pinion Flange Yoke. U-Joint is 3.469 Across; Cap is 1.062

Ford 8.8 1310 Series Pinion Flange Yoke. U-Joint is 3.469 Across; Cap is 1.062. Diameter: 4 Inch Pilot: 2 Inch Female, 4 Equally Spaced Bolt Holes. Face to U-J C/L is 1.650

$92.34 USD

More Info

Inland Empire Drive Line 2-2-949 Ford 8.8 1330 Series Pinion Flange Yoke. U-Joint is 3.875 Across; Cap is 1.062

Ford 8.8 1330 Series Pinion Flange Yoke. U-Joint is 3.875 Across; Cap is 1.062. Diameter: 4.469 Inch Pilot: 2 Inch Female 4 Equally Spaced Bolt Holes. Face to U-J C/L Ic 1.625

$253.95 $234.06 USD 7%

More Info

Inland Empire Drive Line 2-3-1331X Cast Iron Power Glide, Early Warner T-10,16 Spline 1310 Series Transmission Yoke

Cast Iron Power Glide, Early Warner T-10,16 Spline 1310 Series Transmission Yoke. Seal Surface is 1.5; Spline is 1.172 Diameter 16, 4.875 U-J C/L to End of Spline

$246.89 USD

More Info

Inland Empire Drive Line 2-3-5281X TH-375 Trans. Yoke for 1310 Series U-Joint. U-J is 3.469 Across; Cap is 1.062

TH-375 Trans. Yoke for 1310 Series U-Joint. U-J is 3.469 Across; Cap is 1.062. Seal Surface is 1.688; Spline is 1.397 Diameter 31 Based on 32, 5.188'' U-J C/L to End of Spline

$298.75 $298.19 USD

More Info

Inland Empire Drive Line 2-3-6041X C6; TKO 500 and 600 1330 Series Transmission Yoke. U-J 3.469 Across; Cap 1.062

C6; TKO 500 and 600 1330 Series Transmission Yoke. U-J 3.469 Across; Cap 1.062. Seal Surface is 1.390; Spline is 1.68 Diameter 30 Based on 31, 6.00 U-J C/L to End of Spline

$144.43 $134.03 USD 7%

More Info

Inland Empire Drive Line 2-4-4061X Dana 20 OEM Quality Transfer Case Yoke 1310 Series

OEM Quality Transfer Case Yoke 1310 Series. Hub is 1.552 Inches, Spline is 1.125 10, Through the Hole is 1.5 Strap Style

$240.47 USD

More Info

Inland Empire Drive Line 2-4-4341 Dana 231, 300 OEM Quality Transfer Case Yoke 1310 Series CV style

OEM Quality Transfer Case Yoke 1310 Series. Hub is 1.552 Inches, Spline is 1.146 26, Through the Hole is 1.5 CV Style

$205.85 USD

More Info

Inland Empire Drive Line 2-4-6111X Dana 30; 44 Pinion Yoke 26 Spline 1330 Series

Dana 30; 44 Pinion Yoke 26 Spline 1330 Series. Hub is 1.562 Inches, Spline is 1.146 26, Through the Hole is 1.5 U-Bolt Style

$112.54 USD

More Info

Inland Empire Drive Line 2-4-8091X Dana 44 OEM Quality Pinion Yoke U-Bolt Style

OEM Quality Pinion Yoke. Hub is 1.552 Inches, Spline is 1.146, Through the Hole is 1.5 U-Bolt Style

$98.12 USD

More Info

Inland Empire Drive Line 2604-10 Mopar 10 Spline 7260 Pinion Yoke

Mopar 10 Spline 7260 Pinion Yoke. Hub is 1.874 Inches, 10 Spline is 1.170, Through the Hole is 1.5 Strap Style U-J C/L to End of Hub is 3.188, 7260

$218.02 USD

More Info

Inland Empire Drive Line 2604-29 Mopar Pinion Yoke 29 Spline 7260 Series

Mopar Pinion Yoke 29 Spline 7260 Series. Hub is 1.874, Inches, 29 Spline is 1.263, Through the Hole is 1.5 Strap Style 7260

$182.76 USD

More Info

Inland Empire Drive Line 2904-10 Mopar 10 Spline 7290 Pinion Yoke

Mopar 10 Spline 7290 Pinion Yoke. Hub is 1.874 Inches, 10 Spline is 1.188, Through the Hole is 1.5 Strap Style U-J C/L to End of Hub is 3.375, 7290

$218.02 USD

More Info

Inland Empire Drive Line 210088-1XS Center Bearing Support with Polyurethane Cushion for Extreme Service

Center Bearing Support with Polyurethane Cushion for Extreme Service. Bearing ID 1.378, Bolt Hole Spacing is 6.620. Recommended to Reduce Torque Induced Shudder on Startup and When Towing.

$179.55 USD

More Info